PLC SCADA Training in Hadapsar, Pune: Gateway to 750+ Manufacturing Jobs in Chakan and Ranjangaon MIDC (Updated July 2026)

Hadapsar sits at the southern gate of Pune and is the closest city training hub to the Chakan-Ranjangaon manufacturing corridor — home to over 750 active PLC and SCADA engineering openings at any given time. What most freshers and diploma holders do not realise is that geography matters enormously in industrial automation careers: the difference between landing a ₹3.5 LPA entry role and waiting months for a call-back often comes down to whether your institute has direct placement relationships with the companies 40 km up the highway. ABC Trainings Hadapsar was built precisely for this corridor.

Why Hadapsar Is Pune's Strategic PLC SCADA Training Hub

Pune's manufacturing belt runs north from Hadapsar through Wagholi, Sanaswadi, Ranjangaon, and Chakan — an unbroken stretch of MIDC zones with over 2,000 registered manufacturing units. Hadapsar's position at the southern entry makes it the natural training anchor for engineers targeting this belt. Most Pune PLC SCADA institutes are concentrated in Shivajinagar or Kothrud — 45–60 minutes from the actual hiring sites. ABC Trainings Hadapsar is at Shree Tower, opp. Vaibhav Theater, Magarpatta — less than 20 minutes from the Pune-Solapur highway that feeds Ranjangaon. That proximity means our placement team has built direct company-HR relationships with Ranjangaon and Chakan plant recruitment leads — relationships that are harder to build from a Kothrud classroom.

What You Learn in a PLC SCADA Course at ABC Trainings Hadapsar

The PLC SCADA curriculum at ABC Trainings Hadapsar covers Siemens S7-1200/1500 (TIA Portal), Allen-Bradley/Rockwell ControlLogix and MicroLogix, Mitsubishi MELSEC GX Works3, HMI programming (Siemens WinCC Comfort, Wonderware InTouch), SCADA design with InTouch and iFIX, P&ID reading, panel wiring fundamentals, and fieldbus protocols (PROFIBUS, PROFINET, Modbus, DeviceNet). The sequence is structured — basic relay logic first, then PLC ladder, then SCADA integration, then project on a live panel board. Every student leaves with a hands-on project completed on real Siemens and Allen-Bradley hardware, not simulated software. That live project work is what hiring managers at Ranjangaon and Chakan plants verify in the first technical round.

750+ Manufacturing Jobs: Which Companies at Chakan and Ranjangaon Are Hiring Right Now

Here is what the Chakan and Ranjangaon hiring landscape actually looks like right now. LG Electronics (Ranjangaon Plant, near Shirur): consistently hiring automation and PLC engineers for its appliance lines, role titles are Automation Technician and PLC Service Engineer. Whirlpool (Ranjangaon, Malegaon Chakan): hiring PLC operators and maintenance engineers for washer/dryer lines. Tata Motors (Ranjangaon): automation engineers and robotics-PLC integration — requires Siemens TIA Portal and Mitsubishi GX Works3. Bajaj Auto (Chakan Plant, Kuruli, MIDC): maintenance automation engineers, the largest single employer in the corridor. Mercedes-Benz (Chakan, Mouza): PLC and quality automation roles for its India plant. Skoda Volkswagen (Chakan): Siemens-heavy automation roles. Mahindra (Chakan): automation engineers and PLC programmers. Forbes Marshall (Kasarwadi): process automation, steam engineering. The good news: most of these plants conduct quarterly or half-yearly campus drives to which ABC Trainings Hadapsar is directly connected.

PLC SCADA Salary Ranges in Pune's Manufacturing Belt (AmbitionBox/PayScale 2026)

Salaries in the Chakan-Ranjangaon belt follow a clear skill ladder. Fresher PLC Operator (0–1 yr): ₹2.8–3.5 LPA — entry role at plant floor for panel operation and basic fault finding. PLC Maintenance Engineer (1–3 yrs): ₹3.5–6 LPA — requires fault diagnosis, Siemens TIA Portal, and shift responsibilities. PLC/SCADA Programmer (3–5 yrs): ₹6–10 LPA — requires hands-on programming across two or more PLC platforms plus SCADA design. Senior Automation Engineer (5+ yrs): ₹10–14 LPA — project ownership, commissioning, DCS integration. The delta between someone who completed only an online course and someone who trained on real hardware is immediately visible at ₹4–6 LPA salary gap by year 3. At Ranjangaon plants specifically, Siemens TIA Portal proficiency commands a 20–30% premium over generic PLC knowledge.

From Course Completion to First Payslip: The Hadapsar Placement Timeline

Here is the honest timeline from PLC SCADA course enrollment to first payslip at a Chakan or Ranjangaon plant. Month 1–2: Foundation phase — relay logic, PLC basics, ladder programming, TIA Portal introduction. Month 3: Advanced programming — SCADA integration, HMI design, live panel project. Month 4: Placement preparation — resume, mock technical interviews, company-specific preparation. Week 16–20: Company drives — ABC Trainings Hadapsar placement team coordinates quarterly drives with Ranjangaon and Chakan plant HRs. The target is first payslip by month 5–6 from enrollment for motivated candidates. CMYKPY scheme (₹6,000–10,000 support for Maharashtra students) and PMKVY 4.0 (2.1 crore trained, ABT-affiliated) reduce the financial barrier for freshers in the pipeline.

FAQs

What is the duration of PLC SCADA training in Hadapsar at ABC Trainings?

The PLC SCADA course at ABC Trainings Hadapsar runs for 3–4 months in weekday batches and 4–5 months in weekend batches. The curriculum covers Siemens TIA Portal, Allen-Bradley, SCADA with Wonderware/InTouch, HMI programming, and a hands-on project on real PLC hardware.

What salary can I expect after PLC SCADA certification from Hadapsar?

Freshers from ABC Trainings Hadapsar typically land their first PLC SCADA role at ₹2.8–4.5 LPA at Ranjangaon and Chakan MIDC plants. With 2–3 years of experience in PLC programming and SCADA integration, salaries in the same corridor reach ₹6–10 LPA. Siemens TIA Portal expertise commands the highest premium.

Does ABC Trainings Hadapsar provide placement for engineers in Chakan and Ranjangaon MIDC?

Yes. ABC Trainings Hadapsar has direct placement connections with HR teams at LG Electronics, Whirlpool, Tata Motors, Bajaj Auto Chakan, Mercedes-Benz Chakan, and Skoda Volkswagen. Quarterly campus drives are coordinated for eligible students who complete the practical project. Call 7039169629 for the next drive schedule.

Can diploma holders join the PLC SCADA course at Hadapsar?

Yes. Diploma holders in Electrical, Electronics, Instrumentation, or Mechanical Engineering are the most common profile enrolling in PLC SCADA courses at Hadapsar. No prior PLC programming experience is required — the course begins from relay logic fundamentals.