PLC SCADA Training Near Osmanpura: Walking Distance from GECA and Government Polytechnic Aurangabad (Updated July 2026)

GECA (Government Engineering College Aurangabad) and Government Polytechnic Aurangabad together graduate over 1,200 engineers and diploma holders every year from the Osmanpura area. The gap between what these colleges teach in automation and control systems and what Waluj MIDC, AURIC and Chikalthana companies actually need is significant — most curricula cover basic PLC theory but offer no live hardware labs, no SCADA configuration practice and no instrumentation wiring. ABC Trainings' Osmanpura center, located minutes from both campuses, exists precisely to close this gap. Evening and weekend batches are designed around the academic calendar so final-year students can complete PLC SCADA training before graduation day.

Where Is ABC Trainings Osmanpura Center and How Close Is It to GECA?

ABC Trainings Osmanpura center is located on Padampura Road, Osmanpura, Chhatrapati Sambhajinagar — approximately 800 metres from GECA's main gate and under 1 km from Government Polytechnic Aurangabad on Dr. Babasaheb Ambedkar Road. Both campuses are walkable from the Osmanpura center, meaning students do not need to spend time or money on transport between college and training. The center has a fully-equipped PLC lab with Siemens S7-1200/1500 hardware trainers, Allen-Bradley CompactLogix panels, SCADA workstations running Wonderware InTouch and WinCC, and instrumentation benches with live pressure, temperature and flow measurement equipment.

Why GECA and Government Polytechnic Students Need External PLC SCADA Training

GECA and Government Polytechnic cover automation and control systems in the curriculum — but the coverage is primarily theoretical. A typical GECA Electrical or Electronics Engineering syllabus covers basic PLC concepts in a single semester subject, with limited or no hands-on hardware lab time. Students graduate knowing what a PLC is, what ladder logic looks like in a textbook, and what SCADA stands for — but they cannot write a functional PLC program, configure a SCADA tag database or commission a basic process loop. Waluj MIDC and AURIC interviewers test practical skills, not theoretical knowledge. The disconnect means GECA graduates often fail automation interview rounds despite being technically strong in other areas.

What the PLC SCADA Course at Osmanpura Covers — Full Syllabus Breakdown

The PLC SCADA course at ABC Trainings Osmanpura is a 4–6 month program structured around hands-on lab sessions. The syllabus covers: PLC hardware fundamentals (I/O modules, CPU selection, power supplies, panel wiring); Siemens TIA Portal programming (ladder logic, function block diagram, timer/counter, analog I/O handling); Allen-Bradley Studio 5000 basics; SCADA configuration on Wonderware InTouch and Ignition (tag creation, alarm management, trending, reporting); HMI panel design on Siemens SIMATIC; VFD (Variable Frequency Drive) parameter setup and motor control; AutoCAD Electrical for schematic drawing; and instrumentation fundamentals (4-20mA loops, HART communicators, P&ID reading). The course includes 3–4 project-based assignments using real industrial scenarios.

Batch Timings at Osmanpura: Evening and Weekend Options for Students

ABC Trainings Osmanpura runs three batch types to fit around college schedules. Morning batches (9 AM–12 PM) are primarily for post-graduates, working professionals upgrading skills and those not enrolled in college. Evening batches (6–9 PM on weekdays) are designed for final-year students and recent graduates who want to train alongside their studies. Weekend batches (Saturday–Sunday, 9 AM–1 PM) are popular with employed engineers who want to add automation skills to an existing technical career. All batch types cover the same full syllabus. Call 7039169629 for the current batch schedule and to check seat availability in your preferred time slot.

Which Companies Near Osmanpura and Waluj MIDC Hire ABC Trainings Graduates

Companies that consistently hire from ABC Trainings Osmanpura for automation roles include: Lupin Limited MIDC Chikalthana (SCADA and instrumentation engineers, ₹4.0–5.5 LPA); Bajaj Auto Waluj, Plot G-137 (PLC programmers and SCADA operators, ₹3.5–5.0 LPA); Siemens India MIDC Waluj (panel commissioning and TIA Portal engineers, ₹3.8–5.5 LPA); Endurance Technologies E-92 MIDC Waluj (CNC and PLC maintenance, ₹3.0–4.2 LPA); Carlsberg India MIDC Waluj (process SCADA and instrumentation, ₹3.2–4.5 LPA); and Wockhardt MIDC Chikalthana (pharma automation, ₹3.5–5.0 LPA). The Osmanpura center's proximity to both GECA and the Chikalthana pharma cluster makes it one of the most placement-effective centers in the network.

CMYKPY Subsidy for Engineering Students: How to Get ₹6,000–₹10,000 Off Course Fees

The Maharashtra CMYKPY (Chhatrapati Maha Kaushalya Yojana) scheme provides ₹6,000–₹10,000 in direct fee subsidy for eligible candidates enrolled in approved skill development programs. GECA and Government Polytechnic students are typically eligible if they are Maharashtra residents aged 15–35 with a valid Aadhaar card. PMKVY 4.0 (Pradhan Mantri Kaushal Vikas Yojana), the Central Government's parallel scheme, provides additional subsidy for eligible candidates. The combined subsidy can significantly reduce your out-of-pocket training cost. ABC Trainings is an approved partner under both schemes — but subsidy allocation is batch-specific and seats are finite. Call 7039169629 as early as possible to confirm your eligibility before your intended batch starts.

GECA and Government Polytechnic Aurangabad students may be eligible for ₹6,000–₹10,000 in CMYKPY or PMKVY 4.0 fee subsidy. Call 7039169629 or walk into the Osmanpura center with your Aadhaar and college ID to check eligibility before paying fees.

FAQs

Where exactly is the ABC Trainings Osmanpura center relative to GECA?

ABC Trainings Osmanpura center is on Padampura Road, approximately 800 metres from GECA's main gate — a 10-minute walk. Government Polytechnic Aurangabad is under 1 km from the center on Dr. Babasaheb Ambedkar Road, also walkable. The center is in the same neighborhood as both campuses, making it convenient for students to attend after college hours without a separate commute.

Can final-year GECA students attend PLC SCADA training during their last semester?

Yes — the evening batch (6–9 PM weekdays) and weekend batch (Saturday–Sunday 9 AM–1 PM) are specifically designed for students still enrolled in college. Final-year students at GECA typically complete the PLC SCADA course over their final two semesters in the evening batch, graduating with both their engineering degree and a full PLC SCADA certification. This is the most common profile at the Osmanpura center.

Does ABC Trainings Osmanpura offer placement assistance after the PLC SCADA course?

Yes — placement assistance is included for all students who complete the full course. This includes resume preparation tailored for automation roles, mock technical interviews covering PLC and SCADA questions, and direct referrals to Waluj MIDC, Chikalthana MIDC and AURIC companies that hire from ABC Trainings. The Osmanpura center has a dedicated placement coordinator who manages company relationships and schedules interview rounds for graduating batches.

What is the fee for the PLC SCADA course at the Osmanpura center and is subsidy available?

Current course fees are available on enquiry at the center — call 7039169629 for the latest pricing. Maharashtra CMYKPY and PMKVY 4.0 subsidies of ₹6,000–₹10,000 are available for eligible Maharashtra residents, which significantly reduces the out-of-pocket cost. Most GECA and Government Polytechnic students who are Maharashtra residents qualify under these schemes. Confirm eligibility before your batch registration as subsidy seats are allocated on a first-come-first-served basis.