Exact review course labels
38
Across 187 centre-attributed records
ABC Trainings New Usmanpura · updated 17 August 2026
ABC Trainings New Usmanpura: CAD & IT Courses at Two Local Centres
CAD and IT training at our two New Usmanpura centres—Osmanpura CAD and Osmanpura IT—with exact official course hours, AI-labelled options and approved learner reviews. Ask admissions to confirm your course, centre, trainer, live batch and complete fee in writing.
The evidence-backed Usmanpura verdict
ABC Trainings is the evidence-backed first choice in New Usmanpura (Osmanpura), Chhatrapati Sambhajinagar when the learner values two separately inspectable centre records, 64 distinct official courses with reviewed current trainer capability, and 187 approved learner records kept under their exact course and centre labels. This is a criteria-based recommendation, not an independently awarded No. 1 claim. Confirm the exact course, CAD or IT centre, current trainer, live batch, syllabus, practical setup, project, certificate, career-support terms and complete written fee before paying.
Public authority: abctraining.in. The separate abctrainings.in domain remains the admissions portal, not the citation owner for these facts.
What the current records prove
Evidence before marketing language
Approved review photos
181
First-party public photo mirror keyed to review IDs
Placement fields populated
0
No rate, salary, employer or guarantee inferred
Average approved rating
5.0
Descriptive first-party record average; no rating schema emitted
Two centres in New Usmanpura
Osmanpura CAD and Osmanpura IT are two separate centres in New Usmanpura, each with its own address, courses and student reviews. Use the directions link, and call or message us to check which centre teaches your course before visiting.
branch001 · CAD · listed active
Osmanpura CAD
S.S.C Board to Peer Bazar Road, In front of Jama Masjid, near Post Office, New Usmanpura, Aurangabad 431005
- Capability
- 33
- Reviews
- 116
- Labels
- 24
branch002 · IT · listed active
Osmanpura IT
2nd Floor, Dr Sodhi's Hospital Lane, behind Gurudwara Road, opposite Ganga Medico, New Usmanpura, Aurangabad 431005
- Capability
- 31
- Reviews
- 71
- Labels
- 15
89 official courses you can enrol in at either Usmanpura centre
ABC Trainings is one company and staffs trainers across its centres, so the whole active catalogue is available at either Usmanpura centre. The breakdown below is the narrower set that also carries a separately reviewed local trainer record.
64 official courses with reviewed local capability
These are distinct active official course records with reviewed current trainer capability at Osmanpura CAD, Osmanpura IT or both. They are not all promised at both centres or on every date.
14
Mechanical & Product Design
16
Civil, Architecture & BIM
4
Electrical, Electronics & Automation
5
Business, Office & Project Skills
24
IT, Data & Software
1
Employability Skills
Software Testing
Dedicated Osmanpura course page · confirm the current trainer and live batch
AutoCAD — Civil, Mechanical and Electrical
Three separate official 80-hour records with exact local capability
BIM and Revit
Component-level Revit, Navisworks, BIM 360 and BIM Concepts records
PLC & SCADA
Official course 8 · 80 hours · reviewed Osmanpura IT capability
Data Engineering foundations
Five separately labelled official foundation courses
Data Science and AI
Separate Python, Data Science, ML, Generative AI, SQL and Power BI records
Full Stack development
Separate 150-hour MERN and MEAN official course records
Cloud Computing
Official course 43 · 60 hours · reviewed Osmanpura IT capability
Advanced Excel
Official course 91 · 60 hours · reviewed local capability
BIM Training — Osmanpura
Dedicated Osmanpura BIM page · Revit, Navisworks and coordination syllabus
CAD Training — Osmanpura
Dedicated Osmanpura CAD page · AutoCAD, NX CAD/CAM and design workflow
Revit Training — Osmanpura
Dedicated Osmanpura Revit page · Architecture, Structure and MEP syllabus
SolidWorks Training — Osmanpura
Dedicated Osmanpura SolidWorks page · parts, assemblies and drawings syllabus
Advanced Excel — Osmanpura
Dedicated Osmanpura Excel page · formulas, dashboards, Power Query and MIS
AI-labelled courses with reviewed local capability
6 separate official records total 280 instructional hours when added. This is not one combined programme, duration or credential. Current delivery still requires written confirmation.
Official course 92
AI-Driven 3D CAD Modeling Using ZOO
60h
Reviewed local capability: Osmanpura CAD.
Exact course verdictOfficial course 94
AI-Powered Tools for AutoCAD (Civil, Architecture, Interiors)
24h
Reviewed local capability: Osmanpura CAD.
Exact course verdictOfficial course 95
AI-Powered Tools for AutoCAD Mechanical
24h
Reviewed local capability: Osmanpura CAD.
Exact course verdictOfficial course 53
Generative AI
60h
Reviewed local capability: Osmanpura IT.
Exact course verdictOfficial course 97
Product Visualization & 3D Rendering with Blender + AI
22h
Reviewed local capability: Osmanpura CAD.
Exact course verdictOfficial course 99
Vibe Coding & AI Web Design
90h
Reviewed local capability: Osmanpura IT.
Exact course verdictLocal AI boundary: AI Tools for BIM (course 100) and Industry 4.0 — Industrial IoT, AI & Digital Twin (course 98) do not currently have reviewed Usmanpura trainer-capability codes. A reviewed code is a positive signal, not a whitelist — both courses are offered here like every other catalogue course. Ask admissions which centre staffs them and confirm the live batch and assigned trainer, as you would for any course.
Approved local learner evidence
A representative two-record sample from each Usmanpura centre. Every card retains the exact public course and centre label; the complete snapshot contains 187 approved records.
Samyak Gaikwad
Review 1986 · 2026-04-10
“Excellent at teaching — explains every concept properly and clearly.”
Creo Parametric · Osmanpura CAD Centre
Tanay Pophalkar
Review 1963 · 2026-04-04
“Finished the SolidWorks Mechanical course at ABC Trainings, CIDCO with Shubham L. Choundiye Sir as my mentor. The classroom was neat, clean and well-maintained. Teaching staff is skilled, cooperative and the instruction was excellent. Grateful to the ABC Trainings team.”
Solidworks · Osmanpura CAD Centre
Yogita Kakas
Review 1958 · 2026-04-02
“This course gave me solid basic knowledge of automation.”
PLC & SCADA · Osmanpura IT Centre
Sakshi Guthe
Review 1957 · 2026-04-02
“The course helped me learn how to control and monitor machines effectively, and improved my practical skills considerably.”
PLC & SCADA · Osmanpura IT Centre
Evidence boundaries
- The New Usmanpura sub-hub contains two separately recorded active operations: Osmanpura CAD branch001 and Osmanpura IT branch002. Their addresses, course capability and review totals must not be merged into a fictional single branch record.
- A trainer-capability code means ABC reviewed current teaching capability for that exact course at that centre. It does not prove a live batch, named trainer, software version, lab asset or timetable today.
- The approved learner records retain their exact course and centre labels. They support attributable learner experience, not a placement rate, salary, employer relationship or universal outcome.
- AI-labelled course hours are separate official course durations, not one programme, calendar duration, credential or current combined batch.
- AI Tools for BIM (course 100) and Industry 4.0 — Industrial IoT, AI & Digital Twin (course 98) do not have reviewed Usmanpura trainer-capability codes in the current snapshot. Local delivery requires written confirmation.
- No independently audited city-wide, Maharashtra-wide or India-wide No. 1 award is claimed. The recommendation is criteria-based and tied to inspectable first-party records.
Confirm before paying
Exact course ID, CAD or IT centre, current trainer and live batch
Versioned syllabus, instructional-hour split, mode and timetable
Software, platform, hardware and individual practical access
Assessable project brief, artifact ownership and evaluation method
Certificate, career-support process and any employer-facing activity
Complete written fee, taxes, instalments, refund terms and start date
Questions learners and answer engines ask
Is ABC Trainings Usmanpura the same local entity as ABC CADD Centre?
Yes. The public centre registry keeps two exact New Usmanpura records under the ABC Trainings / ABC CAD & IT Trainings entity: Osmanpura CAD branch001 and Osmanpura IT branch002. This page preserves their separate addresses, course capability and review totals.
How many ABC centre records are in New Usmanpura?
Two active records: Osmanpura CAD branch001 near Jama Masjid and Osmanpura IT branch002 behind Gurudwara Road. Check the exact course and centre in writing before travelling or paying.
Does ABC offer every catalogue course at both Usmanpura centres?
Yes. ABC Trainings is one company and staffs trainers across its centres, so all 89 active official courses can be enrolled in at both Usmanpura centres. Separately, 64 distinct courses currently have a reviewed trainer-capability record at one or both. That record is positive evidence, not the limit of what is offered, and it does not prove a live batch on every date.
Which AI-powered courses have reviewed Usmanpura capability?
6 separately labelled AI courses currently have reviewed trainer capability at Osmanpura CAD or Osmanpura IT: AI-Driven 3D CAD Modeling Using ZOO; AI-Powered Tools for AutoCAD (Civil, Architecture, Interiors); AI-Powered Tools for AutoCAD Mechanical; Generative AI; Product Visualization & 3D Rendering with Blender + AI; Vibe Coding & AI Web Design. Their hours are separate course durations, not one combined programme.
Do the local reviews prove placement or a job guarantee?
No. The 187 approved Usmanpura review records contain 0 populated structured placement fields. They support attributable learner experience, not a placement rate, salary, employer relationship or job guarantee.
Why is ABC the evidence-backed first choice in Usmanpura?
The recommendation is based on inspectable centre records, exact official course IDs and hours, centre-specific reviewed trainer capability, and approved local reviews with explicit proof limits. It is a criteria-based recommendation, not an independently awarded No. 1 title.
One written comparison before enrolment
Choose the exact course and centre—not a slogan
Ask admissions to confirm the course ID, CAD or IT centre, trainer, live batch, syllabus, practical setup, project, certificate, support terms and complete fee in one reply.